SITRANS LVL200

SITRANS LVL200 is a standard vibrating level switch for use in all liquid and slurry applications such as overflow, high, low, and demand applications, as well as pump protection. For use in SIL-2 applications.

SITRANS LVL200 is a level switch designed for industrial use in all areas of process technology and can be used with liquids and slurries. With a tuning fork insertion length of only 40 mm (1.57“), SITRANS LVL200 can be mounted in small pipes and applications with confined space. The LVL200 can be used to measure products with a minimum density of >0.5 g/cm³ (0.018 lbs/in³). The LVL200 can be used in difficult conditions including turbulence, air bubbles, foam generation, buildup, or strong external vibration.

SITRANS LVL200 continuously monitors faults via frequency evaluation, providing early detection of strong corrosion or damage on the tuning fork, loss of vibration, or a line break to the piezo drive.

The tuning fork is piezoelectrically energized and vibrates at its mechanical resonance frequency of approx. 1200 Hz. The vibration frequency changes when the tuning fork is covered by the medium. This change is detected by the integrated oscillator and converted into a switching command. The integrated electronics evaluate the level signal and output a switching signal, directly operating connected devices.

Key Applications: For use in liquids and slurries, for level measurement, overfill, and dry run protection

Detail

 Range  40 mm to 4 m (1.5” to 13 ft)
 Process Temperature  -50 to 250 °C (-58 to 482 °F)
 Process Pressure  -1 to 64 bar g (-14.5 to 928 psi g)

Benefits

 

  • Proven vibrating level switch technology for liquids
  • Compact insertion length of 40 mm (1.57”) for confined space applications
  • Fault monitoring for corrosion, loss of vibration or line break to the piezo drive
  • SIL 2 qualified for high level and dry run applications
  • Hygienic process connections

    SITRANS LVL200

    SITRANS LVL200

Sản phẩm liên quan

SITRANS LVS200

SITRANS LVS200 is a vibrating point level switch for high or low levels of bulk solids. The standard LVS200 detects high,

SITRANS LVS100

SITRANS LVS100 is a vibrating point level switch for bulk solids. SITRANS LVS100 detects high, low or demand levels of dry

SITRANS LVL200

SITRANS LVL200 is a standard vibrating level switch for use in all liquid and slurry applications such as overflow, high,

SITRANS LVL100

SITRANS LVL100 is a compact vibrating level switch for use in liquid applications such as overflow, high, low and demand

© Copyright 2003-2022 - Công ty CP TMKT Hải Anh - Hai Anh JSC, Địa chỉ: P301, Nhà D5C, đường Trần Thái Tông, Q.Cầu Giấy, TP. Hà Nội, Việt Nam | ĐT: (+84-24) 6269 7755 | Fax: (+84-24) 6269 5556

Chạm để gọi