SIMATIC ET 200SP

SIMATIC ET 200SP

The scalable SIMATIC ET 200SP I/O system is a highly flexible, modular I/O system with IP20 degree of protection. Via an interface module with PROFINET or PROFIBUS interface it can exchange IO data of the connected I/O modules with a higher-level control system. Alternatively, as further head-end stations, various PLC, F-PLC and open controllers are available as compact S7-1500 controllers (distributed controllers). ET 200SP components are available as SIPLUS version for extreme requirements and a high degree of robustness.

Compact design

 

• Modular configuration with up to 64 modules
• System-integrated self-assembling load group supply without power module via light BaseUnits
• Small size and highly flexible due to the modular design and comprehensive product range
• Up to 16 channels per module
• Permanent wiring
• Hot swapping: Module replacement without tools in RUN
• Operation with gaps

 

Flexible connection system

 

• Push-in terminals for cross-sections up to 2.5 mm²
• BaseUnits for 1-wire or direct multi-wire connection
• Optimum accessibility for wiring due to spring release and measuring tap next to the conductor opening
• Flexible PROFINET-connection via BusAdapter (RJ45, FastConnect, FiberOptic), also as integrated media converter

 

Safety Integrated

 

• Easy integration of fail-safe modules
• Easy F parameter assignment via software
• Group-by-group disconnection of non-failsafe modules

 

High performance

 

• Isochronous PROFINET
• Internal data transfer with up to 100 Mbit/s
• Record analog values and output as of 50 µs
• Record digital values and output as of 1 µs

 

High-performance technology

 

• Modules for the functions Counting, Positioning, Weighing

 

Energy efficiency

 

• Energy meter for recording electrical variables
• System-integrated PROFIenergy with interval substitute values

 

Advanced functions

 

• Configuration control:
  Practical adaptation of the actual configuration via user software (option handling)
• Time-based IO:
  time stamping of the signals to the µs
• MSI/MSO:
  Simultaneous access to I/O data from up to 4 PLCs
• Oversampling:
  n-fold acquisition or output of digital and analog signals within a PN cycle

 

Communication standards

 

• PROFINET IO
• PROFIBUS DP V0/V1
• ET connection for connecting the ET 200AL (IP67)
• IO-Link V1.1
• AS-Interface
• Point-to-point (RS232, RS485, RS422)

 

CPU

 

• PROFINET connection with 3 ports
• IO Controller and PNIO Device
• Optional expansion as DP master/slave
• Also as failsafe version and open controller

 

Labeling of I/O modules

 

• Meaningful labeling on the front of the I/O modules
• Optionally expandable with
• Labeling strips
• Reference identification label