SIMOTICS HV Series H-compact PLUS
Overview
SIMOTICS HV Series H-compact PLUS
General description
Highest power rating, reliability, efficiency and modular cooling system: This distinguishes the three-phase high-voltage motors of the SIMOTICS HV Series H‑compact PLUS.
These motors are available in shaft heights 450, 500, 560 mm with a gray cast iron enclosure, as well as 630 and 710 mm with a steel enclosure in degree of protection IP55 or IP23 – air or water cooled.The insulation and bearing system guarantees the highest degree of reliability.
The MICALASTIC insulation system with VPI impregnation offers high switching and reversing strength and has proven itself worldwide even under the toughest of application conditions: In extreme cold, heat, humid and aggressive environments.The life cycle costs are extremely important – and these make the SIMOTICS HV Series H‑compact PLUS motor so attractive. Especially for motors driven by variable speed drives the optimization for SINAMICS medium‑voltage converters and for the complete drive train offers lower costs during the whole life cycle due to best performance values.
SIMOTICS HV Series H‑compact PLUS motors save energy, require little maintenance and operate reliably over their long motor lifetime. An investment that pays back in a short time. SIMOTICS HV Series H‑compact PLUS motors are environmentally‑friendly and can be recycled up to approx. 98 %.
Application
Typical applications
- Oil & Gas
- Petrochemical industry
- Chemical industry
- Mining
- Water / Waste water
- Marine
- Cement industry
- Metals
- Power generation
- Pumps
- Compressors
- Blowrs / Fans
- Mixers
- Mills
- Conveyor belts
- Ship propulsion- and auxiliary drives
- Steel mills
Sản phẩm liên quan
SIMOTICS HV Series Metall
SIMOTICS HV Series Metals are rolling mill motors and are used worldwide in the metals industry in rolling mills. Tailored to address particular customer requirements, they are used as main drives in almost all rolling applications and all rolling mill types – in five different types of construction.
SIMOTICS HV Series HS-modyn
More than reliable – high-speed high-voltage motors up to 15000 rpm.
The SIMOTICS HV Series HS-modyn sets standards when it comes to the availability of compressor drives: it has the highest degree of reliability and minimum maintenance costs.
SIMOTICS HV Series H-modyn
Individual drive solutions for application and industry sector-specific customer requirements
SIMOTICS HV Series H-compact PLUS
Highest power rating, reliability, efficiency and modular cooling system: This distinguishes the three-phase high-voltage motors of the SIMOTICS HV Series H‑compact PLUS.
SIMOTICS HV Series H-compact
The increasing significance of energy-saving, environmental legislation, the desire for even smaller dimensions and the demands of domestic and international markets have led to the further development of the SIMOTICS HV Series H‑compact that has proven itself over the years.
SIMOTICS HV Series A-modyn
The SIMOTICS HV Series A-modyn of electrical machinery is especially suitable for applications in the areas of power generation, water / wastewater and in the steel industry.
SIMOTICS HV Series A-compact PLUS
It is essential that drive solutions for pumps, fans and compressors are absolutely reliable and cost-efficient. They must also set themselves apart as a result of their first-class quality. This is because the highest degree of availability has topmost priority for these applications
SIMOTICS HV M
Drive power ratings in compressor stations for gas pipelines, gas storage facilities, gas liquefaction plants (LNG) and rolling mills are increasing, and at the same time, the demands relating to plant/system availability and reliability still remain at high levels.