SITRANS P200/P210/P220
The SITRANS transmitters P200, P210 and P220 are compact single-range-transmitters for measurement of absolute and gauge pressure.
In this series we use two different kinds of pressure sensors: two stainless steel sensors and one ceramics sensor. So the measurement of process pressure, absolute pressure and hydrostatic pressure is an easy thing. The measured pressure will be transformed with these sensors into a 4…20-mA- resp. a 0…10-V-signal.
Detail
| Nonlinearity | ≤ 0,25 % |
| Long-term stability | ≤ 0,25% / 12 Monate |
| Measuring range | SITRANS P200: 1 bar to 60 bar gauge
0,6 bar to 16 bar absolute |
| SITRANS P210: 100 mbar to 600 mbar gauge | |
| SITRANS P220: 2,5 bar to 600 bar gauge |
Benefits
- High measuring accuracy
- Rugged stainless steel enclosure
- High overload withstand capability
- For aggressive and non-aggressive media
- For measuring the pressure of liquids, gases and vapors
- Compact design
SITRANS P200/P210/P220
Sản phẩm liên quan
SITRANS P500
The SITRANS P500 has been developed to meet the highest expectations for measuring accuracy, ruggedness, and user-friendliness, and it merges
SITRANS P410
The SITRANS P410 is a digital pressure transmitter with integrated diagnostic functions for HART, PROFIBUS PA- or FOUNDATION Fieldbus communication.
SITRANS P310
The SITRANS P310 is a digital pressure transmitter with integrated HART diagnostic functions and a high operating comfort. Representing a
SITRANS P300
The SITRANS P 300 offers the measuring precision and ruggedness already known from the SITRANS P DSIII. Its stainless steel housing
SITRANS P200/P210/P220
The SITRANS transmitters P200, P210 and P220 are compact single-range-transmitters for measurement of absolute and gauge pressure. In this series we
SITRANS P DS III
SITRANS P DS III The SITRANS P DS III series includes digital pressure transmitters for measuring gauge pressure, absolute pressure, differential pressure, flow and level. Even the standard devices offer comprehensive diagnostics and simulation functions with high reliability. The suitability for use in SIL2 circuits has been certified by external test institutes. With Profibus transmitters, the new PROFISAFE technology guarantees uniform safety from the control system down to the transmitter. Detail Accuracy ≤ 0.065 % Long-Term Stability ≤ 0.125 % / 60 months Measuring range 0 – 1 mbar to 0 – 700 bar Benefits Extensive diagnostics and simulation functions Suitable for installation in SIL 2 applications in accordance with IEC 61508 /IEC 61511. In the PROFIsafe version, it guaranteess maximum communication safety up to the control system level Wide range of certification and approval e.g. ATEX EEx ia, EEx ib, Dust protection, FM, CS Option of using a simulation function for loop check functions Opens up a host of different bus communication options for you: HART, PROFIBUS PA, PROFIsafe or FF
SITRANS LH100
SITRANS LH100 The SITRANS LH100 series pressure transmitter converts the level-proportional hydrostatic pressure into a standardized signal 4 to 20 mA. The transmitter consists of a stainless steel housing (Ø 23,4 mm) with mechanical protection IP 68, a piezo-resistive sensor with ceramic diaphragm. The transmitter cable has a diameter of Ø 6 mm and also contains a vent pipe for connection to the atmosphere. Detail Accuracy 0,3% Long-Term stability 0,25%/12 months Measuring range 0 – 4 mH2O (0 – 13,2 ftH2O) to 0 – 20m H2O (0 – 66 ftH2O) Benefits Compact design Corrosion resistant material housing: stainless steel 316L cable: sheath made of PE cable length: standard 10, 20 or 30 m, special length up to 50 m possible Explosion protected version acc. ATEX II 1 G Ex ia IIC T4 Ga and IEC Ex Ex ia IIC T4 Ga available Standard measuring set: Transmitter Cable hanger Junction box